Long Life, Above
Norxe offers the Simulation industry bespoke solutions for some of their toughest projection challenges.
- Long Life, Low Maintenance
- True Solid-State
- LED Brightness above 4,000 Lumens
- 24/7 reliability and Performance
- Superior Picture Quality
- Designed for IR
- Versatile Design Form and Function
Norxe meets these challenges with an innovative industry first high brightness LED projector.
Using RED, GREEN and BLUE LED’s the colour wheel and other optical engine moving parts are eliminated. Brightness is significantly increased compared to similar products available on the market. The optical engine and imaging device are sealed to prevent the impregnation of dirt and eliminate the need for periodic cleaning. The Texas Instruments DMD and the next generation real solid-state illumination both have a typical lifetime of greater than 100,000 hours. In fact the only serviceable element in the projector is an easy to replace cooling fan cartridge which has a 50,000 hour lifetime / replacement interval.
The optical engine and light sources are sealed, eliminating the need for periodical cleaning. The hermetically sealed DLP DMD and the Solid-state LED illumination both have a typical lifetime of more than 100,000 hours. In fact the only serviceable part is the easily replaceable fan cartridge which should be changed at 50,000 hours.
Built to be shaken and stirred, to withstand many times the force of gravity. Mounted to motion platforms in any orientation. ‘Lens Lock’ technology allows the lens to be locked to the projector body. Lock the lens adjustment rings and lock the Lens body to 3rd party supports for extreme rigidity. 3G motion compatible.
Brighter than any other LED projector on the market. The P1 uses next generation LED technology.
The P1 is designed to be continuously run 24/7 in demanding conditions and is warranted for five years.
The P1 uses High Resolution single chip DLP technology.
It has two modes and two resolutions, resulting in four possible configurations.
- 2,500 lumens WQXGA color mode
- 3,900 lumens WQXGA brightness mode
- 2,750 lumens WUXGA color mode
- 4,250 lumens WUXGA brightness mode
Because LED produce richer more saturated color the perception of brightness to the human eye is even greater than it’s physically measured brightness. It’s know as the Helmholtz-Kohlrausch effect. When the colors are more saturated, our eyes interpret it as the color’s luminance and chroma. This makes our eyes see the colors as brighter than they are physically measured.
Lens options comprise all glass, aspherical, no doublet optical elements & include ‘lens lock’ technology. Scheimpflug adjustment is a standard feature. Lens options are future proofed. Each has been designed to resolve 4K, 5.4 micron pixel pitch.
- N1 – 0.80 – 1.25: @ WQXGA (0.74-1.16:1 @ WUXGA)
- N2 – 1.20 – 1.60:1 @ WQXGA (1.12-1.50:1 @ WUXGA)
Lens focus, zoom (where applicable) & Iris on all lens options is motorised. Stepper motors are used throughout to ensure high degree positional accuracy.
Horizontal & Vertical Lens Shift is motorised. Stepper motors are used throughout to ensure high degree positional accuracy.
1,600:1 to 8,000:1 sequential contrast (full on / full off). greater than 5,000,000:1 dynamic contrast.
High Dynamic Range
brightness 0.6kl to 4 kl.
- Dimming technology provides deep black levels whilst ensuring that image highlights are maintained.
Many factors were taken into consideration when designing the P1, not least the inclusion of IR to support Night Vision Goggle training scenarios. The default IR wavelength is 740 nm, other options are available upon request. 740 nm is the default wavelength because it provides good ANSI Contrast, reduces visible versus IR lens focus variation and removes the need for specialist IR optimised lens options.
Form and Function
- Small form factor and lightweight. Dimensions (L x W x H) are 482 x 405 x 213 mm, weight is 17 kg excl. lens.
- Central lens position and limitless orientation options make the process of designing a system with the P1 much easier.
- Multiple fixing points (4 x M10 + 4 x M6) on the underside of the projector ensure installation versatility, these are especially useful when performing system upgrades.
- Accessory interface points (2 x M4 per corner) are available on each corner of the P1 chassis.
The P1 supports 2 ms, 4 ms, 6 ms & 8 ms smear suppression + 8 ms Dark Frame Insertion.
Preliminary Product Specifications
|Projector Type||Single chip DLP LED projector|
|Resolution||2560 x 1600 (WQXGA)
1920 x 1200 (WUXGA)
|Brightness||2,500 WQXGA RGB mode,
3,900 WQXGA brightness mode
2,750 WUXGA RGB mode,
4,250 WUXGA brightness mode
|Contrast ratio||1,600:1 – 8,000:1 sequential. >5,000,000:1 dynamic|
|Lens options||N1: 0.80 – 1.25:1 @ WQXGA, 0.74 – 1.16:1 @ WUXGA
N2: 1.20 – 1.60:1 @ WQXGA, 1.12 – 1.50:1 @ WUXGA
|Lens shift (max)||N1: Vertical +/- 68%, horizontal +/- 57.5% @ WQXGA
N1: Vertical +/- 56.5%, horizontal +/- 52.5% @ WUXGA
N2: Vertical +/- 120.5%, horizontal +/- 85% @ WQXGA
N2: Vertical +/- 109%, horizontal +/- 78.5% @ WUXGA
(fully sealed optical architecture)
|LED (RGB + optional IR). Standard IR wavelength where applicable is 740 nm, other IR wavelengths available|
|Light source lifetime||> 50,000 hours|
|Orientation||Orientation free, no limitation|
|Inputs||2 x Dual Link DVI, 1 x DisplayPort 1.2, 1 x HDMI 2.0|
|Inputs resolutions||2560 x 1600 – 640 x 480. Max Pixel Clock 667MHz|
|3D||Active – up to WQXGA @ 120Hz, INFITEC®|
|Displayable color||30 Bit per channel|
|Control||IR, RS232, Ethernet, 2 x BNC (sync) & 1 x Mini DIN|
|Control||IR, RS232, Ethernet, 2 x BNC (sync) & 1 x Mini DIN|
|Power requirements||100 – 240V 50-60Hz|
|Power consumption (max)||300 W typical, 500 W max|
|Heat dissipation (max)||1024 BTU/hour typical, 1706 BTU/hour Max|
|Operating temperature||10 – 40°C / 50 – 104°F (0 – 3000m)|
|Storage temperature||-20 – 60°C / -4 – 140°F|
|Operating humidity||20-80% (non condensing)|
|Storage humidity||10-90% (non condensing)|
|Dimensions: (L x W x H)||482 x 405 x 213 mm / 18.98 x 15.96 x 8.39 inch|
|Weight||17 kg / 37.5 Ibs excl. lens|
|Standard accessories||Power cord EUR & US + additional*1, wireless IR remote control, lens shift and lens lock screws|
|Shipping dimensions (L x W x H)||690 x 510 x 340 mm / 27,2 x 20 x 13,4 inch|
|Shipping weight||21,5kg / 47,4Ibs excl. lens|
|Certifications||CE, FCC Class A, cNemkous, KC, CCC|